Lighting Standing Pilots
To light Cooktop I Pilots: I
1. Make
sure all controls are OFF.
2. Remove the grates and reflector pans from cooktop. Lift the cooktop and rest on support rod.
3. To Ilght, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be Ydto J/ain (.6X-.953 cm) high. 4. If the pilot flame needs adjustment, turn the pilot adjustment screw on the manifold pipe. 5. Lower the cooktop and replace the grates before using the surface burners.
To light Oven Burner Pilot:
sure the oven control is OFF. 2. Remove the broiler drawer. Slide drawer out to stops, lift both sides, then slide the rest of the way out.
1. Make
3. Hold a lit match over the oven burner pilot located at the rear of the burner. 4. After the oven burner pilot is burning steady. check burner lighting by turning the Oven Control to a temperature abovel4O�F (60°C). The burner will take 50-60 seconds to light. 5. Replace the broiler drawer.
